Argo MILO PLUS Operating Instructions Manual page 4

system, etc.). Please refer to the maximum power input data
indicated on the air conditioner's data plate.
 Connection to the electricity grid must take place in accordance
with current installation standards.
 Ensure that the automatic switches and system protection valves
are able to withstand a start-up current of 6A (normally for less than
1 second).
 The system socket must always be fitted with an efficient earth
connection.
 Make sure that the plug is fully inserted. Do not use multiple
adapters. Do not touch the plug with wet hands. Make sure that the
plug is clean.
 Do not use the plug as a means by which to start/stop the air
conditioner: use the ON/OFF button on the remote control or on the
control panel.
 Do not install the air conditioner in rooms where it may receive
water splashes (e.g. laundry rooms).
 This air conditioner can be used by children of 8 years of age or
older, and by persons with reduced physical, sensory and mental
abilities or who lack the necessary know-how and experience to
operate it, if under the supervision or instruction of a person
responsible for their safety, so that they are fully aware of the
attendant risks.
 Before moving or cleaning the device, ensure that it is unplugged
from the socket.
 Do not move the air conditioner while it is operating; first turn the
appliance off, check for any condensate build-up and empty it if
necessary.
 To turn the appliance off, set the remote control to OFF and remove
the plug from the socket. Pull on the plug only. Do not pull the cord.
 Do not use the appliance if the cord or plug are damaged. If the
power supply cord is damaged, it must be replaced by the
V 06/20
34