Samsung OfficeServ 7200 Technical Manual page 89

OfficeServ 7200
TECHNICAL MANUAL
MOH/BGM source #1
MOH/BGM source #2
• MISC 1 and MISC 2 ports are located on the front panel of the MCP.
MMC
Select music sources for C.O. lines in MMC 408 and music sources for
extensions in MMC 308. For detailed instructions on the MMC programs, refer
to OfficeServ 7200 Programming
The following ports are assigned to the external MOH inputs on the MIS daughter card:
HARDWARE
ITEM
MOH/BGM Ext. Source #1
MOH/BGM Ext. Source #2
7.2.2 Connecting External/Additional Page Equipment
Instead of an internal speaker, external broadcasting equipment, such as amps or
speakers, and additional equipment that can broadcast page(ring) signals outside a
building can be connected to the OfficeServ 7200 system.
Connect external/additional paging equipment to the MISC1 and MISC2 ports of the
MCP board. The MIS optional daughter board should be installed on the MCP board.
The power of the external/additional paging equipment should be connected
separately.
The MIS daughter board provides a voice pair and a two dry contact pairs to be used
with customer-provided paging equipment. Connect the customer-provided paging
equipment to the page output pins of a MIS daughter board
PINS 4 & 5
PINS 2 & 7
Figure 7.29 Connecting MOH/BGM Sources
Manual.
MISC
FUNCTION # in MMC 724
01
02
7.24
Home Page
INSTALLATION
PART 7 SEPTEMBER 2005
MISC 2
MISC 1
DEFAULT
DN (Ports)
3762
3763
(see Figure 7.31).
Table of Contents