OfficeServ 7200
TECHNICAL MANUAL
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with
locking pins. This method can cause the keyset to wobble as the keyset feet do not fit
securely to the mounting surface.
64 BUTTON MODULES
Using one pair twisted #24 AWG or #26 AWG jumper wire, cross-connect each 64
button module (64 BM) to the DLI port or plug into the KDb-DLI of your choice
7.1.8 of this installation
telephone. It must be assigned to that station in MMC 209. A maximum of four (4) 64
button modules can be programmed on a system. OfficeServ 7200 system can have a
maximum of two (2) 64 button modules per keyset.
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommu-
nication line cord.
OR
1
2
3
Figure 7.23 Wall-Mounting an iDCS Keyset
section). The 64 BM module can be assigned to any keyset
7.17
Table of Contents
Home Page
INSTALLATION
PART 7 SEPTEMBER 2005
(see part