Table of Contents
Home Page
OfficeServ 7200
INSTALLATION
TECHNICAL MANUAL
PART 7 SEPTEMBER 2005
Figure 7.25 Attaching 24B/12B to AOM
ATTACHING iDCS 64 BUTTON MODULES TO AN iDCS KEYSET
First remove the base wedge from the iDCS 64 Button Module and attach the bracket
to it with two of the screws provided
(see Figure 7.27).
Remove the base wedge of the keyset and place it to the right of the 64 Button Module
and attach the bracket/64 BM to the keyset with the remaining two screws.
The base wedge can now be replaced.
NOTE: If you wish to attach two 64 button modules to a keyset, connect the 64 button
modules together first and then attach them to the keyset.
7.19