Connecting Stations And Additional Equipment; Connecting Stations; Table 7.1 Distance Between Stations And The System - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
PART 7. CONNECTING STATIONS AND
ADDITIONAL EQUIPMENT
This section describes how to connect various stations and additional equipment, such
as analog/digital phones, door phones and door locks, to the OfficeServ 7100 system.

7.1 CONNECTING STATIONS

7.1.1 Safety Precautions
To reduce the risk of personal injury, follow these precautions before connecting
telephone circuits:
• Never install telephone wiring during a lightening storm.
• Never install telephone jacks in a wet location unless the jack is specifically
designed for wet locations.
• Do not connect stations in a humid area.
• Never touch non-insulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
• Connect stations using #24 AWG or #26 AWG cables.
The maximum distance between stations and the OfficeServ 7100 are as follows:
Digital phone
Analog phone
Door phone
AOM

Table 7.1 Distance Between Stations and the System

Station
7.1
Home Page
Distance
Maximum 400 m/1312 ft (for AWG #24)
Maximum 1 km/3280 ft (for AWG #24)
Maximum 400 m/1312 ft (for AWG #24)
Maximum 400 m/1312 ft (for AWG #24)
Table of Contents
INSTALLATION
PART 7 APRIL 2007