Samsung OfficeServ 7100 Technical Manual page 61

OfficeServ 7100
TECHNICAL MANUAL
7.1.8 Wall-Mounting Keysets
WALL-MOUNTING iDCS KEYSETS
iDCS keysets come equipped with a reversible base wedge. To wall-mount a keyset,
remove the wedge from the keyset and mount the wedge to the wall using one of the
methods below (see Figure 7.12).
Use screw holes 1 and 2 to attach the base wedge to a standard electrical outlet box.
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with
locking pins. This method can cause the keyset to wobble as the keyset feet do not fit
securely to the mounting surface.
WALL-MOUNTING DS, ITP-5121D and ITP-5107S KEYSETS
DS, ITP 5121D and ITP 5107S keysets come equipped with a reversible base stand. To
wall-mount a keyset, remove the base stand, reverse it, and attach stand in the bottom
slots of the keyset. Use screw holes 1 and 2 to attach the keysets to the wall
Figure 7.13).
OR
1
2
3
Figure 7.12 Wall-Mounting an iDCS Keyset
7.9
Table of Contents
Home Page
INSTALLATION
PART 7 APRIL 2007
(see