Samsung OfficeServ 7100 Technical Manual page 62

OfficeServ 7100
TECHNICAL MANUAL
To secure the handset once you wall-mounted your keyset you must remove the
handset retaining clip reverse it such that the extended clip is facing the top of the
phone (see Figure 7.13).
IN WALL-MOUNTING
Figure 7.13 Wall-Mounting DS 5000, ITP-5121D and ITP-5107S Keysets
7.1.9 Attaching Add-On-Modules to Keysets
ATTACHING iDCS 64 BUTTON MODULES TO AN iDCS KEYSET
First remove the base wedge from the iDCS 64 Button Module and attach the bracket
to it with two of the screws provided
Remove the base wedge of the keyset and place it to the right of the 64 Button Module
and attach the bracket/64 BM to the keyset with the remaining two screws.
The base wedge can now be replaced.
NOTE: If you wish to attach two 64 button modules to a keyset, connect the 64 button
modules together first and then attach them to the keyset.
BASE STAND SLOTS
SCREW HOLES
1 2
BASE STAND
HANDSET
RETAINING CLIP
POSITION
(see Figure 7.14).
7.10
Home Page
INSTALLATION
PART 7 APRIL 2007
HANDSET
RETAINING CLIP
IN DESKTOP
POSITION
G
Table of Contents