OfficeServ 7100
TECHNICAL MANUAL
2.3.2 Required Tools
• A mid-sized Phillips screwdriver
• Two brackets and six screws for
attaching rack
• Two clamp screws
2.3.3 Installing in a Rack
The procedure for installing the OfficeServ 7100 cabinet inside a 19-inch rack is as
follows (The optional rack mount kit is required for this method.
separately):
1) Attach the cabinet bracket to the bottom surface of the OfficeServ 7100 cabinet and
fasten the bracket firmly with the two screws.
Figure 2.1 Tools Required for Rack Installation
Figure 2.2 Rack Installation (1)
2.2
Table of Contents
Home Page
INSTALLATION
PART 2 APRIL 2007
This kit is sold