Table of Contents
Home Page
OfficeServ 7100
INSTALLATION
TECHNICAL MANUAL
PART 3 APRIL 2007
3.4.2 MODEM Daughter Card
The optional modem daughter card is mounted to connector P7 of the MP10 card. This
modem daughter card allows remote dial up connection to the system for system
administration and configuration. This is an alternative method for connecting to the
system when a LAN/WAN connection is unavailable. The MODEM board has the
following functions:
The Modem board operates in OfficeServ 7100 via V.24 interface. In addition, the
Modem board supports the V.90 protocol. The OfficeServ 7100 controls the Modem
board via serial communication using standard AT commands.
See section 3.2.3 "Installing MP10"
Figure 3.16 Modem Card
3.15