Flip Arm End Cap Replacement - Turnstone Springboard Manual

Flip Arm End Cap Replacement

1.
To remove end cap, strike underneath side with a
rubber mallet.
2.
To assemble new end cap, place on top of arm
mechanism and strike with the rubber mallet. End
cap is held in place with a spring clip. Make certain
end cap is held on securely.
Printed on 100% Recycled and 100% Recyclable Stock
NO trees were cut down to produce this booklet
(Please recycle this booklet when finished)
1
2
939504514 Rev F
Page 6 of 6