Turnstone Surprise TS305 Quick Start Manual

TS305

™

Surprise

Task Chair

Stool Desk

Chair

2001 Steelcase Inc.

Grand Rapids, MI 49501 U.S.A.

Printed in U.S.A.

Insert cylinder into base

With base resting on floor, insert

cylinder as shown.

Slide cylinder (A) up through cylinder (B)

(see fig 1). With cylinder (A) engaged with

cylinder (B), slide cylinder (C) down over

cylinders (A and B) (see fig 2). Refer to

fig. 3 for completed assembly.

fig. 1

fig. 2

fig. 3

Page 1 of 3

TS305 Rev D

Table of Contents

Do you have a question about the Surprise TS305 and is the answer not in the manual?

Page 1 TS305 ™ Surprise Insert cylinder into base With base resting on floor, insert cylinder as shown. Task Chair Stool Desk Chair Assemble cylinder cover Slide cylinder (A) up through cylinder (B) (see fig 1). With cylinder (A) engaged with cylinder (B), slide cylinder (C) down over cylinders (A and B) (see fig 2).
Page 2 Place cover over the cylinder (see fig. 1). Attach seat to cylinder For stools with a foot ring, insert the gas cylinder Line up hole over cylinder, and place seat down. By into the foot ring and tighten (see fig 2). Place grabbing the seat, firmly push the entire chair towards cover over the cylinder (see fig.
Page 3 Attach back to chair (refer to your model number chair below) For TS305-01, TS305-04, TS305-05, TS305-06, TS305-07, TS305-08: Unscrew the bolt, TS305-07 TS305-01 TS305-02 slide metal base of back through TS305-04 TS305-09 TS305-08 slit of rear of seat as shown. TS305-05 TS305-06 For TS305-02, TS305-09:...