Page 2
STEP tools needed bivi trunk • Remove brackets from trunk. • Place the two hanging Hang brackets into the upper brackets. leg slot (a) and swing into assembly video position (b). trunk myturnstone.com/bivi/instructions time needed brackets (4) assemble time: 5 minutes...
Page 3
STEP For assembly video go to myturnstone.com/bivi/instructions • Pick up the bivi trunk (one person at each end) and place the bottom of the storage unit on top of the edges of the hanging brackets. • Next have one person hold the front of the storage unit in place while the...
Page 4
tools needed bivi half round table assembly video half round worksurface brackets (2) myturnstone.com/bivi/instructions time needed assemble time: 5 minutes half round worksurface hooks (2) thumb screws (4) knobs (2) not allowed with 48” or 60” bivi single team table really a little easy...
Page 5
For assembly video go to myturnstone.com/bivi/instructions STEP STEP • Place two brackets into the • Tighten knob (a). upper leg slot and swing • Make sure that the hook goes over down (a). bottom horizontal leg. Hang Tighten knob. • Move brackets to outer brackets.
Page 6
STEP STEP • Place half round worksurface on • Line up the hole in the brackets (a). brackets with threaded • Make sure the support brace on the insert on the bottom of the Place half Tighten underside of the worksurface hooks worksurface.
Need help?
Do you have a question about the Bivi Trunk and is the answer not in the manual?
Questions and answers