Leica M10-R Instruction Manual page 129

The most recent recording is not displayed on the
LCD panel
Picture quality
The picture is too bright
Image noise
Round white stains, similar to soap bubbles
Images are out of focus
Images are overexposed
The image is grainy or there is image noise
Unnatural colors and brightness
No images are displayed
Images cannot be displayed
Preview is deactivated
Light sensor was covered while picture was taken
Long exposure times (>1 s)
ISO sensitivity set too high
Flash photography in very dark environment: reflections
of dust particles
Lens is dirty
Camera moved during exposure
The desired subject elements were not congruent in the
viewfinder
Flash is activated in bright surroundings
Strong light source in the image
(Half) backlight falling into the lens (also from light
sources outside the image range)
Selected exposure time is too long
ISO sensitivity set too high
Picture taken in artificial light or extreme brightness
No memory card inserted
The recordings were taken with another camera
The file is in video format
File name of the image was changed on a PC
Activate
Auto Review Auto Review
Make sure that the light sensor is not obstructed
Activate the noise suppression function for long-term
exposure times
Decrease ISO sensitivity
Deactivate the flash
Clean the lens
Flash, modes
Mount the camera on a tripod
Use shorter shutter speeds
Ensure perfect congruence of the superimposed
images in the split image rangefinder
Change the flash mode
Avoid strong light sources in picture composition
Use the lens hood or change to another object
Select a shorter exposure time or turn the shutter
A
speed setting dial to
Decrease ISO sensitivity
Try shorter shutter speeds
Insert the memory card
Transfer the recordings to another device to view them
Use another device for playback
Use appropriate software for image transfers from a PC
to the camera
EN
129