Flash Range; Flash Exposure Compensation - Leica M10-R Instruction Manual

FLASH RANGE

EN
The usable flash range depends on the aperture and sensitivity
values set manually or calculated by the camera. It is important to
ensure that the subject is within the relevant flash range for
sufficient illumination. A permanent setting to the shortest
available shutter speed for flash mode (sync time) may often result
in unnecessary underexposure of those subject elements that are
not lit sufficiently by the flash.
This camera allows the fine tuning of the shutter speed used in
flash mode in combination with aperture priority depending on the
conditions of the object or your own picture composition ideas.
Factory setting:
1/f 1/f
▸ Select
Flash Settings Flash Settings
▸ Select
Max. Flash Sync. Time Max. Flash Sync. Time
▸ Select the desired value
( , , ,
1/f 1/f 1/(2f) 1/(2f) 1/(4f) 1/(4f) 1/125 s 1/125 s
96
in the main menu
, , , , ,
1/60 s 1/60 s 1/30 s 1/30 s 1/15 s 1/15 s 1/8 s 1/8 s 1/4 s 1/4 s

FLASH EXPOSURE COMPENSATION

This function can be used to selectively reduce or enhance flash
exposure regardless of ambient light, e.g. to brighten the face of a
person in the foreground when taking a picture outdoors in the
evening while retaining the same general lighting mood.
Factory setting:
▸ Select
Flash Settings Flash Settings
▸ Select
Flash Exposure Compensation Flash Exposure Compensation
• A scale with a red setting mark is displayed in the submenu.
The function is deactivated if the value is set to
▸ Set the value on the scale
, )
1/2 s 1/2 s
0 EV 0 EV
in the main menu
.
0 0