Leica M10-R Instruction Manual page 113

APPLY/ACTIVATE PROFILES
Factory setting:
Standard Profile Standard Profile
▸ Select in the main menu
User Profiles User Profiles
▸ Select
Load Profile Load Profile
• A list of profile names is displayed.
▸ Select a profile
• The selected profile is marked as
Note
• will appear in the original menu list instead of the name of the
profile used if you change one of the settings for the profile
currently in use.
.
active active
EXPORTING/IMPORTING PROFILES TO/FROM THE
MEMORY CARD
▸ Select in the main menu
User Profiles User Profiles
▸ Select or
Export to Card Export to Card Import from Card Import from Card
▸ Confirm the selection
Notes
• When importing and exporting, all profile slots are transferred to
the card, i.e. including any empty slots. Any existing profiles
stored in the camera will be overwritten, during the profile
import. Individual profiles cannot be imported or exported.
• Any existing set of profiles will be replaced on the memory card
during an export without an acknowledgment prompt.
in the submenu
EN
113