Manual Setting Via Metering - Leica M10-R Instruction Manual

MANUAL SETTING VIA METERING

Gray Card Gray Card
This metering variant captures only the color hue metered within
the metering field and calculates the mean gray value from it.
▸ Select in the main menu
White Balance White Balance
▸ Select
Gray Card Gray Card
• A message appears on the LCD panel:
Please take a picture for setting the white balance Please take a picture for setting the white balance
▸ Shutter release
• Make sure that the image field includes a white or neutral gray
(reference) area.
• The following appears on the LCD panel:
– the image based on automatic White balance
– a cross in the center of the image
Moving the metering field
▸ Press the directional pad left or right as needed
Taking measurements
▸ Aim the metering field at a white or neutral gray area
▸ Press the center button
• The image preview is displayed. The color rendering is
adjusted according to the White Balance setting.
.
– once the color is rendered to your satisfaction
▸ press the center button a second time
• The setting will now be saved.
– the color is not rendered to your satisfaction
▸ retake your measurements at a different point in the image
field
Creating a new image for White Balance
▸ Press the
Canceling the measurement
▸ Tap the shutter button
Note
• A value configured using this method will remain unchanged (i.e.
it will be used for all subsequent photographs) until new
measurements are taken or one of the other white balance
settings is selected.
button
MENU
EN
75