Live View Mode - Leica M10-R Instruction Manual

SHOW ALTERNATIVE IMAGE RANGES/FOCAL LENGTHS
Additional bright-line frames may be displayed depending on the
attached lens. These allow a simulation of the relevant focal
lengths. This process helps in the selection of the right lens for the
desired image range.
▸ Push the image field selector towards the lens
• The image field selector will snap back automatically when
released.

LIVE VIEW MODE

The Live View mode allows viewing the image object on the LCD
panel while the picture is taken. The image is show exactly as it is
rendered by the attached lens.
LIVE VIEW MODE ON/OFF
▸ Press the button
LV
PERMANENT DEACTIVATION OF LIVE VIEW MODE
Live View mode can be permanently disabled. Pressing the
button will then have no effect.
▸ Select in the main menu
EVF/Display Control EVF/Display Control
▸ Select
LV Screen Target LV Screen Target
▸ Select
LV disabled LV disabled
Notes
• Live View mode is based on the image captured by the sensor.
The camera must control the shutter. Shutter control is audible
and may result in a slight delay in shutter release.
• The camera will warm up when Live View mode is used for an
extended period of time. Power consumption will simultaneously
increase.
• Alternating current causes brightness fluctuations invisible to
the human eye in many light sources. This may result in a
flickering of the Live View screen image due to the sensitivity
and scan rate of the image sensors. Picture quality will not be
impacted. The effect can be avoided by selecting a slower
shutter speed.
EN
LV
67