Edit File Names; Creating A New Folder; Resetting Image Numbering - Leica M10-R Instruction Manual

EDIT FILE NAMES

▸ Select in the main menu
Image Numbering Image Numbering
▸ Select
Change Filename Change Filename
• A keyboard submenu is displayed.
• The input line contains the full file name. The four characters
marked in white in the first group can be modified.
▸ Delete the four selected characters
▸ Enter a new name of your choice (see p. 51)
▸ Confirm
Notes
• The change to a file name applies for all later pictures as well
until a new change is made. The sequential number (second
4-digit group of numerals) will not be affected by the change; it
can, however, be reset by creating a new folder.
• Lower case letters are unavailable.

CREATING A NEW FOLDER

▸ Select in the main menu
Image Numbering Image Numbering
▸ Select
New Folder New Folder
• A keyboard submenu is displayed.
• The input line contains the full folder name. The five white
characters can be modified.
▸ Delete the five selected characters
▸ Enter a name of your choice
▸ Confirm
• A prompt appears. Here you decide if you want the file
numbers in the new folder to start at 0001 again (
numbering should continue (
Notes
• A file name change also applies to all subsequent folders or until
another change is made.
• When all user-affected changes are reset, then the folder name
will once again be "XXXLEICA".
• Lower case letters are unavailable.

RESETTING IMAGE NUMBERING

▸ Select in the main menu
Image Numbering Image Numbering
▸ Select
Reset Image Numbering Reset Image Numbering
• A relevant prompt is displayed.
▸ Select /
Yes Yes No No
Note
• The name part of a new folder created using
remains unchanged. The file numbers in
Reset Image Numbering Reset Image Numbering
the folder will start again at 0001.
) or if the
Yes Yes
).
No No
EN
115