Flash Exposure Displays In The Viewfinder - Leica M10-R Instruction Manual

FLASH EXPOSURE DISPLAYS IN THE VIEWFINDER

EN
(with system-compatible flash units)
The flash icon in the viewfinder display of the Leica M10-R gives
feedback on and indicates various operating states.
does not appear
(despite the flash unit
being switched on
and ready)
flashes slowly
before the picture is
taken
(2 Hz)
lights up before the
picture is taken
remains continuous-
ly lit after shutter
release*
flashes rapidly after
shutter release
(4 Hz)*
switches off after
shutter release*
*only in TTL flash mode
98
• The flash unit cannot fire
• A correct operating mode must be
set on the flash unit or an HSS-com-
patible flash unit must be connected
• The flash unit is not yet ready for use
• The flash unit is ready for use
• The flash is still ready
• Successful flash photography
• The flash unit is not yet ready for
further use
• Flash intensity was insufficient