Self-Timer - Leica M10-R Instruction Manual

Notes
• Appears on the LCD panel if the bracketing function is
activated.
• The picture sequence: underexposure/correct exposure/
overexposure.
• The working range for automatic bracketing may be limited
depending on the available shutter speed/aperture combination.
• With automatic ISO sensitivity control enabled, the sensitivity
calculated by the camera automatically for the raw picture will
also be applied to all other pictures in a series, i.e. the ISO value
will not change during bracketing. This may mean that the
slowest shutter speed specified under
exceeded.
• The focus range for automatic bracketing may be limited
(depending on the originally set shutter speed). The specified
numbers of pictures will be taken regardless. Several pictures in
a series may consequently be taken with the same exposure
values.
• The function remains active until another function is selected in
the submenu. If no other function is selected, another
Drive Mode Drive Mode
series of pictures is taken each time the shutter button is
pressed.
is
Maximum Exposure Time Maximum Exposure Time

SELF-TIMER

The self-timer function allows taking pictures with a preset time
delay. We recommend that the camera is placed on a tripod.
▸ Select in the main menu
Drive Mode Drive Mode
▸ Select /
Self Timer 2 s Self Timer 2 s Self Timer 12 s Self Timer 12 s
▸ Shutter release
• The remaining time until exposure is counted down on the
LCD panel. The self-timer LED at the front of the camera
counts down the delay time.
• A running self-timer delay time can be canceled at any time
by pressing the button and restarted by pressing the
MENU
shutter button.
Notes
• In self-timer mode, the exposure value is set just before the
picture is taken.
• The function remains active until another function is selected in
the submenu.
Drive Mode Drive Mode
EN
87