Leica M10-R Instruction Manual page 144

EXPOSURE
EN
Exposure metering Exposure metering
TTL (exposure metering through the lens), with working aperture
Metering principle/method Metering principle/method
When measuring the light reflected by the light blades of the 1. shutter
curtain onto a measuring cell: strongly center-weighted; when
measuring on the sensor: Spot metering, center-weighted measure-
ment, multi-field metering
Exposure modes Exposure modes
Aperture priority mode (A): automatic shutter speed control with
manual aperture preselection
Manual (M): manual setting for shutter speed and aperture
Measuring range Measuring range
At room temperature and normal humidity for ISO 200 at aperture 1.0
EV -1 to EV 19 at aperture 32
Flashing of the left triangular LED in the viewfinder indicates values
below the measuring range
Exposure Compensation Exposure Compensation
± 3 EV in 1⁄3 EV increments
Automatic bracketing Automatic bracketing
3 or 5 exposures, up to ±3 EV, in 1⁄3 EV increments
ISO sensitivity range ISO sensitivity range
: ISO 100 to ISO 50000
ISO Auto ISO Auto
Manual: ISO 100 to ISO 50000
White balance White balance
Automatic ( ), presets (
Auto Auto
,
Fluorescent Warm Fluorescent Warm Fluorescent Cool Fluorescent Cool
measurements (
Gray Card Gray Card
144
, , ,
Daylight Daylight Cloudy Cloudy Shadow Shadow Tungsten Tungsten
, ), one memory slot for manual
Flash Flash
), manual color temperature setting
FLASH EXPOSURE CONTROL
Flash unit connector Flash unit connector
Via accessory shoe with central and control contacts
Synchronization Synchronization
Optionally at the 1. or 2. shutter curtain
Flash sync time Flash sync time
: 1⁄180 s, slower shutter speeds available, automatic switchover to
TTL linear flash mode with HSS-compatible Leica system flash units if
sync time is undercut
Flash exposure metering Flash exposure metering
Using center-weighted TTL pre-flash metering with Leica flash units
(SF 40, SF 64, SF 26), or flash units compatible with the system with
SCA3502 M5 adapter
Flash measuring cell Flash measuring cell
2 silicon photodiodes with converging lens in the base of the camera
Flash exposure compensation Flash exposure compensation
±3 EV in 1⁄3 EV increments
Displays in flash mode Displays in flash mode
Flash Exposure Compensation via the flash icon LED
EQUIPMENT
WLAN WLAN
WLAN function for connecting to the Leica FOTOS app. The Leica app
is available from the Apple App Store™ or the Google Play Store™.
Complies with the IEEE 802.11b/g/n standard (default WLAN
protocol), channel 1-11, encryption method: WLAN-compatible WPA™/
, ,
HMI HMI
WPA2™, access method: infrastructure mode
(in the viewfinder only)