Table of Contents
Advertisement
Press the [Tare/ ] key to change the setting.
Press the [Zero/Enter] key to store the changed setting.
Accumulation of data in memory when [Print] is pressed
To accumulate weight in the memory when [Print] is pressed, set "
use the [Print] key to only print the weight without adding it to memory, set "
".
Press [Tare/ ] to change the setting between
Press the [Zero/Enter] key to store the changed setting.
Auto zero range
The auto-zero will automatically set the scale to zero when the displayed weight
is almost near zero. This helps to make sure that the scale is measuring weight
from an accurate zero starting point.
The Auto zero value can be set to 0.5, 1, 2 or 4 scale divisions. The normal
setting is 1 scale division. The display will show "
Press the [Tare/ ] key to change the value.
Press the [Zero/Enter] key to store the changed setting.
Selectable unit of weight displayed
The scales are normally set to display in kilograms, however they will show the
weight in grams, if enabled.
The display will show "
Press [Tare/ ] to change the setting between
Press the [Zero/Enter] key to store the changed setting.
The CBWa scales can change units from kilograms to grams, pounds or
pounds/ounces immediately if they are enabled as in the step above. This also
allows the scales to be calibrated in either kilograms or pounds and all memory
accumulations are in either kilograms or pounds as last selected.
When the scales are set to display in other units of weight the accumulation
function is still keeping the weight in kilograms (or pounds for the CBWa series)
in memory and will use the base weighing unit when printing over the RS-232
interface.
@Adam Equipment Company 2005
" or "
".
9
and
.
".
or
". To
Hide quick links:
Advertisement
Table of Contents
