Cbw Parameters (Ver. 1.2-2.03) - Adam Equipment CBW Series Service Manual

Hide thumbs Also See for CBW Series:
Table of Contents

Advertisement

5.2

CBW PARAMETERS (VER. 1.2-2.03)

The scale has several parameters that allow the user to set the scale to:
Display the weight in other increments of weight to minimise the affects of
vibration, wind or other environmental conditions.
Control the back light on the display. It may be necessary to turn the backlight
off to maximise battery life.
Set the Accumulation to Automatic, manual or set the RS-232 interface to
continuously print the weight.
Set the accumulation to be active when [Print] key is pressed or to be inactive.
Set a range for auto zero.
Select another weighing unit than the standard.
Disable the Limit Warning Beeper.
Adjust the ADC Speed.
To set these parameters press the [Func] and [Print] keys at the same time.
Setting the scale increment
The display will show "
shown is the default scale increment value.
To change to a different increment value press [Tare/ ].
Press the [Zero/Enter] key to store the changed value.
For example, on a 15kg scale the standard increment is 0.5g, the value can be
changed to 1.0g or 2.0g.
Control the backlight
The standard is to have the backlight operate automatically, turning it off when
the scale is not being used.
The backlight can be set to be "
maximum battery life is achieved with the backlight turned off.
Press the [Tare/ ] key to change the setting.
Press the [Zero/Enter] to store the changed setting.
Automatic accumulation
With "
" the memory will accumulate the weight automatically.
"
" will enable the manual accumulation.
"
" will set the RS-232 interface to send the weight continuously and the
accumulation function is disabled.
@Adam Equipment Company 2005
" where
can be 1, 2, 5,10 or 20. The first value
", "
" (Automatic)
8
or "
". The

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents