Connecting The Welding Torch To The Wirefeeder; Connecting The Welding Torch To The Power Source And The Cooling Unit - Fronius MHP 280i G PM Operating Instructions Manual

Connecting the
1
welding torch to
the wirefeeder
Connecting the
1
welding torch to
the power source
and the cooling
unit
*
3
54
3
9 1 0
5
6
Only if the optional coolant connections are fitted in the cooling unit and when
using a water-cooled welding torch.
Always connect the coolant hoses according to their colour coding.
* Only if the optional coolant con-
nections are fitted in the wirefeeder
and when using a water-cooled
welding torch.
Always connect the coolant hoses
according to their colour coding.
2