Safety; Warning Notices On The Device - Fronius MHP 280i G PM Operating Instructions Manual

Safety

Warning notices The welding torch is fitted with safety symbols and a rating plate. The rating plate and
on the device safety symbols must not be removed or painted over. The symbols warn against opera-
ting the equipment incorrectly, as this may result in serious injury and damage.
Rating plate with safety symbols
Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
-
-
-
Welding is dangerous. The following basic requirements must be met to ensure the
equipment is used properly:
-
-
-
44
These Operating Instructions
The enclosed "Safety rules" document
All the Operating Instructions for the system components, especially the safety rules
Welders must be sufficiently qualified
Suitable protective equipment must be used
All persons not involved must be kept at a safe distance from the welding torch and
the welding process
Warning of moving parts