Jumper Settings - Leadtek WinFast K7NCR18 Series User Manual

2.3. Jumper Settings

Clear CMOS Data
Jumper
J13
Audio output selection
Jumper
JP6
CPU Frequency
Jumper
JP10-Version D
JP9-Version A
JP10-Version D
JP9-Version A
SATA Selection
Jumper
J3
Memory Voltage Selection
Jumper
JP11
*NOTE: If the users use 133/166/200MHz CPU, after booting up, please
select " Advanced Chipset Features"-- "FSB Frequency" in BIOS
menu. As you move the control bar and stop in "FSB Frequency"
this column, then press the button "Page down" to choose 133MHz ,
166MHz or 200MHz and save it. After finishing these steps, restart
your computer system. (Version D is auto-detect without adjusting.)
Setting
Clear CMOS
Normal (Default)
Setting
From back panel (Default)
From front panel
Setting
100MHz
166MHz
133/166/200MHz (Default)
100/133MHz (Default)
Setting
Enable (Default)
Disable
Setting
2.6V (Default)
2.7V
2.8V
1
1
1
1
5