Leadtek WinFast K7NCR18 Series User Manual page 28

third-party IDE bus master driver). If your hard drive and your system software both
support Ultra ATA 66/100, select Auto to enable BIOS support. The options are:
Auto and Disabled.
IDE Rrefetch Mode [Enabled]
The options are: Enabled and Disabled.
Init Display First [PCI Slot]
If you install an additional PCI display cards, you can select either a PCI display
card or the onboard/AGP display to activate the display boot-up screen.
OnChip USB [V1.1+2.0]
Selecting Enabled allows the system Universal Serial Bus (USB) controller when
you have USB peripherals. The options are Disabled, V1.1+2.0, and V1.1.
USB Keyboard Support [Disabled]
If you use a USB keyboard, please choose USB A or USB B.
USB Mouse Support [Enabled]
The options are: Enabled and Disabled.
Primary AudioCodec at [Onboard]
The options are: Onboard and ACR.
AC97 Audio [Auto]
Selecting Auto allows the BIOS to detect the audio device you use.
MC97 Modem [Auto]
The options are: Auto and Disabled.
MAC Lan (nVIDIA) [Auto]
The options are: Auto and Disabled.
Machine MAC (NV) Address [Disabled]
The options are: Enabled and Disabled.
MAC Lan (3COM) [Auto]
The options are: Auto and Disabled.
On chip 1394 [Auto]
The options are: Auto and Disabled.
MAC (NV) Address Input
For inputting the MAC address. Your MAC address is printed on the sticker label on
the motherboard.
IDE HDD Block Mode [Enabled]
Selecting Enabled allows automatic detection of the optimal number of block
read/writes per sector the drive can support.
24