Installing Usb Driver - Leadtek WinFast K7NCR18 Series User Manual

5.1.3. Installing USB Driver

If your operating system is Windows XP, please update it to
Windows XP SP1 that can support USB2.0, and then follow the steps to
install USB drivers:
Step 1: Firstly, click the icon "Start"
on the left-down corner of the
screen, then select "Setup",
"Control Panel" , "Switch to
Catalogue detect", "System".
The 'System Properties'
dialog box pops up. Click
'Hardware' this tab and go to
the dialog box as shown in
the figure to the right. Click on
the 'Device Manager' button
and then click 'OK'.
Step 2: Another dialog box "Device
Manager" appears. Double
click on "Universal Series
(USB) Controller".
40