Installing Sata Driver - Leadtek WinFast K7NCR18 Series User Manual

Step 5: Once the installation is
completed, the wizard will ask
if you want to restart your
computer, then click 'Yes' to
restart your computer.

5.3. Installing SATA Driver

Step 1: Insert the "WinFast
Motherboard & SCSI
Software Pack CD" into the
CD-ROM drive.
Step 2: Your computer will run the
Autorun program
automatically and the
WinFast K7NCR18 series
setup screen will appear as
shown in the figure to the
right. Click 'SATA Driver
Setup'.
Step 3: Then select 'SATA GUI
Setup' .
Step 4: The dialog box pops up and
welcome you to install
SATARaid drivers. Then
click 'Next'.
44