Installation Instructions
7
Setting Charging Characteristics
NOTICE
Battery defect due to incorrect charging
To protect the battery from damage due to incorrect charging, set a
suitable charging characteristic before installation. Follow the battery
manufacturer's instructions.
To set a charging characteristic, perform the following steps:
1.
Turn the potentiometer to the desired position (see characteristics
sheet).
The arrow in the middle of the potentiometer indicates the
selected characteristic.
2.
To prevent accidental adjustment of the charging characteristic, stick
the supplied sticker on the potentiometer.
Ensure that the notch in the sticker is above the LED.
The charging characteristic is set.
8
Mounting
To mount the device, perform the following steps:
Choose a cool, dry and well-ventilated mounting site.
Do not mount the device directly next to or above batteries.
Guarantee adequate cooling for an unimpeded supply of
cooling air.
1.
Fasten the assembly bracket to
the device using the 4 lateral
holes (5 mm Ø).
The device is mounted.
Setting Charging Characteristics
Page 9 of 14