Regency City Series Owners & Installation Manual page 16

owner's information
5. Ensure all 7 front clamps are in the open position to allow clearance for
the glass.
ACC40LE shown
6. Lift up the front panel using the supplied vacuum clamps and position into
the lower front channel–ensure the front panel is accurately centered—with
the front panel in position—secure in place by closing the 3 lower clamps
and 4 upper clamps.
Press glass vacuum clamps in open position firmly onto surface of glass. Bring
handles together to close.
Open
Handle front panel with supplied vacuum clamps
16 | City Series ACC40E
Open clamps
prior to plac-
ing front glass
panel
Closed
Note: Ensure that the front glass is centered and evenly spaced with side glass
(3 sided unit) - open to release glass clamps to remove from surface of glass.
Open clamps to
release pressure on
the springs
7. Return to the side panel(s), and release the upper and lower clamps. The
springs will release and push the glass side panel forward slightly—this will
create a seal between the front and side panels. When the junction between
the front and side glass panels is sealed, close the clamps to secure the
side panel(s) in place.
8. To remove the glass panels—always remove the side panel(s) (for 3 sided
units) before removing the front panel.
9. Reverse steps to remove glass.