Table of Contents
Advertisement
OPERATION
Unpacking the appliance
1.
Remove the exterior and interior packaging. Check that ice scoop is included. If
any parts are missing, please contact Kogan.com.
2.
Clean the interior with lukewarm water and a soft cloth. Take out the ice basket
and clean it.
3.
Find a location for the ice maker that is protected from direct sunlight and other
sources of heat (i.e.: stoves, furnaces, and radiators). Place the icemaker on a level
surface. Make sure that there is at least 4 inches of space between the back and
sides of the icemaker and the wall.
4.
Allow one hour for the refrigerant fluid to settle before plugging the icemaker in.
5.
The appliance must be positioned so that the plug is easily accessible.
6.
Before placing water bottle on the unit, be sure that the drain plug on the back is
tightly fastened.
7.
Hold the water bottle vertically and upside down (over the unit) and place the
water bottle into the smart core receptacle. Apply slightly pressure to pierce the
bottle cap with the spigot. This unit accepts two, three or five-gallon water bottles
with pierceable sealed caps.
Advertisement
Table of Contents
