Kogan KA21CBDISPA User Manual page 7

2-in-1 commercial ice cube maker and water dispenser
Hide thumbs Also See for KA21CBDISPA:
Table of Contents

Advertisement

Connecting the appliance
DANGER
Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, discontinue use and contact Kogan.com.
1.
This unit should be properly grounded for user safety. The power cord of
this appliance is equipped with a three-prong plug which mates with
standard three-prong wall outlets to minimize the possibility of electric
shock.
2.
Plug your appliance into an exclusive, properly installed, grounded wall
outlet. Do not, under any circumstances, cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician.
3.
This appliance requires a standard 220~240 volt, 50Hz electrical outlet
with a three-prong ground.
Making ice cubes
1.
Press On/Off on the control panel to begin the ice making cycle.
2.
Select the size of the ice cube by pressing the Select button.
3.
The ice making cycle lasts 6 to 15 minutes, depending on the size of the ice cube
selected and the ambient temperature. During extreme temperatures, the
operational time will differ significantly.
4.
If the water pump cannot inject water, the ice maker will stop automatically, and
the Add Water indicator will illuminate on the operation panel. Check the water
bottle and replace with a new bottle full of water as required.
5.
Press On/Off button again to start the unit again.

Advertisement

Table of Contents
loading

Table of Contents