Table of Contents
Advertisement
OPERATION
Before first use
1.
Unpack the appliance, then check to ensure that all the accessories are included. If
not, contact Kogan Support.
2.
Install the ice maker on stable, level surface with sufficient ventilation (at least 25cm),
far from heat sources such as ovens, heaters and corrosive gases to ensure good
operation.
3.
The ice maker cabinet should never exceed 45°. Do not turn upside down. This can
cause the compressor or refrigerating system to operate incorrectly. Please allow time
for the fluids in the compressor to settle after the ice maker is moved or transported
(at least 30 minutes). Before using the ice maker for the first time, please wait for 2
hours after installation.
Notes:
•
Clean before first use. (See "Cleaning & Care")
•
Do not fill the water reservoir with hot water. This may damage the ice maker. It is
best to fill the water reservoir with water of room temperature or lower.
•
Do not use the appliance in very cold environments (lower than 5°C).
Advertisement
Table of Contents
