OPERATION
Filling and powering
1. Place the drip tray and drip tray cover onto the appliance. Open the side door and
fill water (7°C–32°C) into the water tank until just below the 'MAX' line.
Fill with water
'MAX' line
2. Ensure you have allowed the refrigerant to settle for one hour. Plug the power cord
into a grounded wall outlet. The power indicator ' ' on the display will then begin
flashing.
3. Press the power button on the control panel. The power indicator ' ' on the display
will then turn solid, and the large ice cube indicator '
appliance will then begin making ice.
Note:
If the full indicator is illuminated, this indicates the appliance is full of ice and will
stop operating automatically.
Note:
Ensure the socket is easily accessible.
' will begin flashing. The