Perkins 1106D Troubleshooting Manual page 179

SENR9982
Illustration 66
Typical schematic of the indicator lamp circuit
Illustration 67
Typical example of the P1 OEM connector pin locations
(1) Ground (GND)
(2) Ground (GND)
(3) Ground (GND)
(9) Ground (GND)
(10) Ground (GND)
Test Step 1. Inspect Electrical Connectors
and Wiring
A. Turn the keyswitch to the OFF position.
(7) Battery (+)
(8) Battery (+)
(15) Battery (+)
(16) Battery (+)
(40) Keyswitch
B. Thoroughly inspect P1 OEM connector and the
(59) Warning lamp
(60) Stop lamp
(61) PTO lamp
(62) Low oil pressure lamp
(63) Cold start lamp
lamp connections. Refer to Troubleshooting,
"Electrical Connectors - Inspect" for details.
179
Troubleshooting Section
g01212865
g01176466