Perkins 1106D Troubleshooting Manual page 14

14 SENR9982
Troubleshooting Section
On – The lamp will be on when the shutdown level
has been reached. The "Shutdown" lamp will also
be on.
Wait to Start Lamp
Lamp check – The lamp will come on for 2 seconds.
The lamp will then go off unless "Wait to Start" is
active.
On – The lamp is on during a "Wait to Start" period.
Low Oil Pressure
Lamp check – The lamp will come on for 2 seconds.
The lamp will then go off unless there is an active
warning.
On – The lamp will come on when a low oil pressure
event is detected. The "Warning" lamp and the
"Shutdown" lamp may also come on.
PTO Lamp
Lamp check – The lamp will come on for 2 seconds.
The lamp will then go off unless the PTO mode is
active.
Flashing – The lamp will be flashing when the PTO
mode is turned on but when the PTO is not engaged.
On – The lamp will come on when PTO mode is
engaged.
Color of Lamps
Typically, the "Shutdown" lamp is colored red and the
"Warning" lamp is colored amber. The other lamps
are optional.