Unpacking And Checking Contents - Bosch 4100XC Operating/Safety Instructions Manual

1600A01Z1U.qxp_4100XC 10/31/19 1:21 PM Page 15
trical shock during unpacking and setting
up, do not plug the power cord into a source
of power. This cord must remain unplugged
whenever you are working on the table saw.
ble the table saw, plug in the power cord or
turn the switch on until the missing parts
are obtained and are installed correctly.
Model 4100XC table saw is shipped complete
in one carton.
Separate all parts from packing materials and
check each one with the illus tration and the
list of loose parts to make certain all items
are accounted for before discarding any pack-
ing material (Fig. 2).
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
1 Table saw assembly
2 Rip fence
3 Table insert
4 Barrier guard assembly
5 Anti-kickback device
6 Miter gauge
7 Push stick
8 Thin workpiece fence
9 Bottom Screen
Styrofoam block (for shipping
10
purposes only)
NOTE: Remove styrofoam block 10 (for ship-
ping purpose only) located between the table
and motor (Fig. 3). You may cause damage to
the blade elevation system if trying to raise
blade if styrofoam is not removed.

Unpacking And Checking Contents

To avoid injury from un-
expected starting or elec-
If any parts are missing,
do not attempt to assem-
QTY.
1
1
1
1
1
1
1
1
1
1
Fig.2
8
4
5
6
3
Fig. 3
7
2
1
9
10
15