Settings Menu; Malfunctioning; Room - Daikin Altherma 3 H F Installer's Reference Manual

8 | Configuration

8.4 Settings menu

8.4.1 Malfunctioning

8.4.2 Room

Installer reference guide
114
You can set additional settings using the main menu screen and its submenus. The
most important settings are presented here.
In case of a malfunction,
error code, open the menu screen and go to [0] Malfunctioning. Press
more information about the error.
0
User profile
Operation
Malfunctioning
Room
Main zone
Setpoint screen
Control the room temperature of the main zone via setpoint screen [1] Room.
See "8.3.5 Setpoint screen" [
Schedule
Indicate if the room temperature is controlled according to a schedule or not.
# Code
[1.1] N/A
Heating schedule
Applicable for all models.
Define a heating schedule of the room temperature in [1.2] Heating schedule .
See "8.3.8 Schedule screen:
Cooling schedule
Only applicable for reversible models.
Define a cooling schedule of the room temperature in [1.3] Cooling schedule.
See "8.3.8 Schedule screen:
Antifrost
Room frost protection [1.4] prevents the room from getting too cold. This setting
behaves differently depending on the set unit control method [2.9]. Perform
actions according to the table below.
Main zone unit control method [2.9]
Leaving water temperature control
([C‑07]=0)
or will appear on the home screen. To display the
4
107].
Schedule:
▪ No: Room temperature is directly controlled by
the user.
▪ Yes: Room temperature is controlled by a
schedule and can be modified by the user.
4
Example" [ 110].
4
Example" [ 110].
Room frost protection is NOT guaranteed.
Description
Description
EPGA11~16DAV3 + EAVH16SU18+23DA6V
Daikin Altherma 3 H F
4P606487-1 – 2019.12
for