User Settings - Daikin Altherma 3 H F Installer's Reference Manual

8.4.7 User settings

Language
Time/date
EPGA11~16DAV3 + EAVH16SU18+23DA6V
Daikin Altherma 3 H F
4P606487-1 – 2019.12
HP Heat pump. If heating up time by the heat pump takes too long,
auxiliary heating by the backup heater can take place
T Backup heater OFF temperature (T
BUH OFF
T Maximum heat pump temperature at sensor in domestic hot water
HP MAX
tank
T Heat pump OFF temperature (T
HP OFF
T Heat pump ON temperature (T
HP ON
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
Example: setpoint (T )≤maximum heat pump temperature–[6‑01] (T
U
HP Heat pump. If heating up time by the heat pump takes too long,
auxiliary heating by the backup heater can take place
T Maximum heat pump temperature at sensor in domestic hot water
HP MAX
tank
T Heat pump OFF temperature (T
HP OFF
T Heat pump ON temperature (T
HP ON
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
INFORMATION
The maximum heat pump temperature depends on the ambient temperature. For
more information, see the operation range.
# Code
[7.1] N/A
# Code
[7.2] N/A
INFORMATION
By default, daylight savings time is enabled and clock format is set to 24 hours. If you
want to change these settings, you can do this in the menu structure (User
settings > Time/date) once the unit is initialised.
)
U
−[6-01])
HP MAX
−[6-00])
HP OFF
−[6-01])
HP MAX
−[6-00])
HP OFF
Description
Language
Description
Set the local time and date
8 Configuration
|
–[6‑01])
HP MAX
Installer reference guide
145