To Clean The Water Filter In Case Of Trouble - Daikin Altherma 3 H F Installer's Reference Manual

11.7.2 To clean the water filter in case of trouble

EPGA11~16DAV3 + EAVH16SU18+23DA6V
Daikin Altherma 3 H F
4P606487-1 – 2019.12
5 Connect a drain hose to the bottom of the water filter.
6 Open the valve on the bottom of the water filter to drain water from the
water circuit. Collect the drained water in a bottle, sink,... using the installed
drain hose.
7 Remove the 2 clips that fix the water filter.
a
b
a Clip
b Magnetic filter/dirt separator
8 Remove the water filter.
9 Remove the drain hose from the water filter.
CAUTION
Although the water circuit is drained, some water may be spilled when removing the
magnetic filter/dirt separator from the filter housing. ALWAYS clean up spilled water.
1 Remove the water filter from the unit. See
4
filter" [ 184].
CAUTION
To protect the piping connected to the magnetic filter/dirt separator from damage it
is recommended to perform this procedure with the magnetic filter/dirt separator
removed from the unit.
2 Unscrew the bottom of the water filter housing. Use an appropriate tool if
needed.
CAUTION
Opening the magnetic filter/dirt separator is ONLY required in case of severe issues.
Preferably this action is never to be done during the complete lifetime of the
magnetic filter/dirt separator.
b
a
a Bottom part to be unscrewed
b Water filter housing
11
|
a
Maintenance and service
"11.7.1 To remove the water
Installer reference guide
185