Menu Screen; Setpoint Screen - Daikin Altherma 3 H F Installer's Reference Manual

8.3.4 Menu screen

8.3.5 Setpoint screen

EPGA11~16DAV3 + EAVH16SU18+23DA6V
Daikin Altherma 3 H F
4P606487-1 – 2019.12
Submenu
[3] Additional zone
[4]
Space heating/
cooling
[5] Tank
[7]
User settings
[8]
Information
[9] Installer settings Restriction: Only for the installer.
[A]
Commissioning
[B]
User profile
[C]
Operation
Go through the list.
Enter the submenu/setting.
The setpoint screen is displayed for screens describing system components that
need a setpoint value.
Restriction: Only displayed if there are two
leaving water temperature zones. Shows the
applicable symbol for your additional zone
emitter type.
Set the leaving water temperature for the
additional zone (if present).
Shows the applicable symbol for your unit.
Put the unit in heating mode or cooling mode.
You cannot change the mode on heating only
models.
Restriction: Only displayed if a domestic hot
water tank is present.
Set the domestic hot water tank temperature.
Gives access to user settings such as holiday
mode and quiet mode.
Displays data and information about the
indoor unit.
Gives access to advanced settings.
Restriction: Only for the installer.
Perform tests and maintenance.
Change the active user profile.
Turn heating/cooling functionality and
domestic hot water preparation on or off.
Example:
7.1
Language
Time/date
Holiday
Possible actions on this screen
8 Configuration
|
Description
Installer reference guide
107