Canon iR1200 Series Service Manual page 94

CHAPTER 2 USING THE MACHINE
#1 SSSW-SW28: V.8/ V.34 protocol settings
Bit Function
0 Caller V.8 protocol
1 Called party V.8 protocol
2 Caller V.8 protocol late start
3 Called party V.8 protocol late start
4 V.34 reception fallback
5 V.34 transmission fallback
6 not used
7 not used
[Bit 0]
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used.
[Bit 1]
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is in-
hibited when called and the V.21 protocol is used.
[Bit 2]
If ANSam signal is not received during transmission (mainly manual transmission), select
whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in DIS
signal. If NO is selected, the CI signal is not transmitted and the V.8 protocol is not used
even if the DIS that specifies the V.8 protocol is received.
[Bit 3]
Select whether to declare the V.8 protocol in DIS signal for reception (mainly caller manual
transmission). If NO is selected, the V.8 protocol cannot be used because it is not declared in
DIS signal.
[Bit 4]
Select whether the receiver falls back during V.34 reception. If "Prohibit" is selected, the re-
ceiver does not fall back.
[Bit 5]
Select whether the transmitter falls beck during V.34 transmission. If "Prohibit" is selected,
the transmitter does not fall back.
2-46
COPYRIGHT © 2002 CANON INC.
1 0
No Yes
No Yes
No Yes
No Yes
Prohibited Not
prohibited
Prohibited Not
prohibited
- -
- -
2000 2000 2000 2000 CANON iR1200/iR1300 Series REV. 0 AUG. 2002
Factory setting
0
0
0
0
0
0