Canon iR1200 Series Service Manual page 301

4.4 Cleaning at Time of a Service Visit (ADF)
At time of a service visit, clean the items described in 4.2 "Cleaning by the User (ADF)";
then, perform the following as needed:
4.4.1 Original Pickup Roller
Clean it with a cloth moistened with water (and wrung well). If dirt is excessive, use alco-
hol with lint-free paper thereafter, dry wipe it with a cloth or lint-free paper.
4.4.2 Original Separation Roller
Clean it with a cloth moistened with water (and wrung well). if the dirt is excessive, use
alcohol with lint-free paper thereafter, dry wipe it with a cloth or lint-free paper.
4.4.3 Original Separation Pad
Clean it with a cloth moistened with water (and wrung well). If the dirt is excessive, use
alcohol and lint-free paper thereafter, dry wipe it with a cloth or lint-free paper.
4.4.4 ADF Registration Roller
Clean it with a cloth moistened with water (and wrung well). If the dirt is excessive, use
alcohol and lint-free paper thereafter, dry wipe it with a cloth or lint-free paper.
4.4.5 Original Feed Roller
Clean it with a cloth moistened with water (and wrung well). If the dirt is excessive, use
alcohol and lint-free paper thereafter, dry wipe it with a cloth or lint-free paper.
4.4.6 Original Delivery Roller
Clean it with a cloth moistened with water (and wrung well). If the dirt is excessive, use
alcohol and lint-free paper thereafter, dry wipe it with a cloth or lint-free paper.
COPYRIGHT © 2002 CANON INC.
CHAPTER 6 MAINTENANCE AND INSPECTION
2000 2000 2000 2000 CANON iR1200/iR1300 Series REV. 0 AUG. 2002
6-7