Canon iR1200 Series Service Manual page 366

CHAPTER 7 TROUBLESHOOTING
#081 [TX] The other party is not equipped with an ITU-T-compliant password
reception function
Cause: Bit 50 of DIS received from the other party is '0'.
Remedy: 1. Transmit to a fax machine equipped with a password function.
2. Use subaddress transmission that does not use a password.
3. Use normal G3 transmission.
#082 [RX] The other party is not equipped with an ITU-T-compliant selective
polling transmission function
Cause: Bit 47 of DIS received from the other party is '0'.
Remedy: Ask the operator to set normal polling transmission, and use polling recep-
tion.
#083 [RX] Selective polling address or the password does not match during
ITU-T-compliant selective polling reception
Cause: The selective polling address or the password of the machine does not match
that of the other machine.
Remedy: Match the selective polling address and the password of the machine with that
of the other party.
#084 [RX] The other party is not equipped with a password function for ITU-T-
compliant selective polling reception
Cause: Bit 50 of DIS received from the other party is '0'.
Remedy: Use selective polling that does not use a password.
#995 [TX/RX] Memory transmission reservation clear/memory reception image clear
Cause: In the case of transmission, the user canceled the memory transmission reser-
vation.
Remedy: Transmit once again.
Cause: In the case of reception, the user deleted the image that had been received in
memory reception.
Remedy: Ask the operator of the other party to transmit once again.
7-62
COPYRIGHT © 2002 CANON INC. 2000 2000 2000 2000 CANON iR1200/iR1300 Series REV. 0 AUG. 2002