Print Test (3: Print) - Canon iR1200 Series Service Manual

3.21.5 PRINT Test (3: PRINT)

Press '3' on the keypad from the Test Mode men u to select Print Test mode. A press on '2'
or '6' on the keypad during the test will generate any of the following 2 types of test pat-
terns. Do not use the others, as they are especially designed for use by the factory and R&D.
'2' on Keypad
3-2: Press it to generate BLACK, which is a solid black print.
'6' on Keypad
3-6: Press it to generate ENDURANCE, which is a black band.
To stop test printing, press the Stop key.
Check to make sure that the print
pattern is free of contraction,
elongation, dirt, or black lines.
COPYRIGHT © 2002 CANON INC.
F02-321-09
2000 2000 2000 2000 CANON iR1200/iR1300 Series REV. 0 AUG. 2002
CHAPTER 2 USING THE MACHINE
Check it to make sure that the
print pattern is free of white
line or uneven density.
2-83