JOYTECH PY1400ACL User Manual page 16

DIP Switch
1. External button switch. ON - Three button switch; OFF - One button switch (X7 terminal CLS
button can be used to circularly control the main engine OPEN/STOP/CLOSE/STOP).
2. Automatic close time.
3. Automatic close time.
2 ON 3 OFF: automatic close time is 15s,
2 OFF 3 ON: automatic close time is 30s,
2 OFF 3 OFF: automatic close time is 45s,
2 ON 3 ON: no automatic close function.
Infrared connection
Infrared photocell function: In the closing process, when infrared ray of the infrared sensor is
covered, the gate will open immediately, to protect user and property security.
The distance between photocell receiver and photocell emitter should be not less than 2 meters,
otherwise will affect the induction of the photocell.
If connect the infrared photocell, please remove the short connection between I.R and GND on the
X5 terminal.
PE N L PE
X1 X1
10A 250V 10A
24VDC 24VDC
GND GND
I.R I.R
CLLM CLLM
COM COM
OPLM OPLM
COM COM
X8 X8
STP STP
CLS CLS
OPN OPN
Infrared Infrared receiver
250V
X5 X5
X7 X7
receiver connecting connecting
Set NC NC Set
－ ＋
Com Out Com Out
Figure 19
Infrared emitter Infrared emitter connecting connecting
－ ＋