Eval-M3-Im564 Main Features - Infineon iMOTION EVAL-M3-IM564 User Manual

EVAL-M3-IM564 User Manual
iMOTION™ Modular Application Design Kit

EVAL-M3-IM564 main features

3 EVAL-M3-IM564 main features
EVAL-M3-IM564 is an Evaluation board for motor drive applications with single phase PFC integrated 3 phase
IPM. Combined in a kit with one of the available MADK control board options, it demonstrates Infineon's motion
control IC and IPM technology for motor drives with single phase PFC.
Main features of CIPOS™ Mini IPM IM564-X6D/IM564-X6DS are:
• 3 half bridges with TRENCHSTOP™ 20 A/600 V and antiparallel diodes for inverter section
• 20 A/600 V CoolMOS™ Power MOSFET and rapid switching emitter controlled diode for PFC section
• Lead-free terminal plating; RoHS compliant
• Very low thermal resistance due to DCB
• Rugged SOI gate driver technology with stability against transient and negative voltage
• Negative potential allowed up to VS =-11 V for single transmission at VBS=15 V
• Integrated bootstrap functionality
• Overcurrent shutdown
• Temperature monitor
• Undervoltage lockout at all channels
• Low side common emitter
• Cross conduction prevention
• All six switches turn off during protection
The Evaluation board characteristics are:
• Input voltage 160~265 VAC
• Maximum 2800 W motor power output
• Power Factor Correction
• On board EMI filter
• Current sensing with single shunt
• Auxiliary power supply with 15 V, 3.3 V
• Overcurrent protection
• Overtemperature hardware protection
• Sensing of DC-link voltage
• Thermistor output
• Fault diagnostic output
• Measurement test-points compatible to standard oscilloscope probes
• PCB is 148 mm × 165 mm and has two layers with 35μm copper each
• RoHS compliant
User Manual 6 of 45 Revision 1.0
2019-09-17