4. Specifications
Power Consumption
Swipe Speed
Indicators
LED Indicator
Communication
Interface
Card Size
Dimension
4.1. Interface Cable and Connector
RS232 interface:
IDT standard RS232 Interface Cable
•
DB-9 Female connector with 2mm power jack in the housing
•
Standard cable length is 6 feet
•
Pin Out Table
J1*
Color
Signal
1
-
CASE_GND
2
White
TXD
3
Green
RXD
4
Yellow
VCC
5
Brown
RTS
6
Grey
CTS
7
Black
GND
*J1 is the connector to PCB end and P1 is DB-9 end
5VDC +/- 10%
Maximum operating consumption is less than 50mA
RS232 interface: external power adaptor that supplies power through RS232
cable.
USB interface: Is from host interface and no external power adaptor needed.
3 to 65 inches per second
Bi-directional
Tri-color LED
The LED is off while reading and decoding.
•
The red indicates bad read.
•
The green indicates a good read, or the machine is ready.
•
Beeper
A beeping sound indicates good read.
•
2mmx5mm, Green/Red dual color under firmware control
RS232
Baud Rate – 1200, 2400, 4800, 9600, 19200, 38400, 56700, 115200
•
Data bits – 8
•
Stop bits – 1 or 2
•
Parity – off, odd, even, mark, or space
•
Supports RTS/CTS hardware and Xon-Xoff software handshaking
•
USB
Complies with USB 2.0 specification
•
PS2 Keyboard
IBM PS2 interface compatible
•
Supports cards that meet the ISO 7810 and 7811 1-7 standards.
3.94 inches (length) by 1.38 inches (width) and 1.18 inches (height).
P1*
SHELL
2
3
From power jack
8**
4**
5
SecureMag Encrypted MagStrip Reader User Manual
Page | 8