Appendix B: Setting Configuration Parameters And Values - ID Tech SecureMag User Manual

13. Appendix B: Setting Configuration Parameters and Values

Not all Function IDs are present in different hardware versions of the SecureMag.
The codes in this list reflect the last row in the table below:
The '-' feature is not currently supported and exists for compatibility.
•
The 's' feature is available in the RS232 serial version of the reader.
•
The 'u' feature is available only in the USB version.
•
The 'k' feature is available in the keyboard version.
•
The 'p' feature is available only in the SPI version.
•
The 'r' "Reset All" does not affect this value.
•
The 'n' is not directly settable.
•
The 'd' feature is only for reader with the data editing feature.
•
The 'e' feature is only for reader with encrypt feature.
•
The 'i' feature is ignored for encrypted transactions.
•
Most Function ID settings related to formatting the track output do not work in Secure Mode.
Exceptions to this are Preamble and Postamble in keyboard mode only. It is currently not possible to
mix security with OPOS and JPOS support.
SecureMag Encrypted MagStrip Reader User Manual
Page | 54